Hitachi IJ RX2-SD160 Instruction Manual page 187

2 Press Copy data (USB→IJP) .
The copy data screen is displayed.
Selects the type
Copy data ＵＳＢ→ＩＪＰ
of data to be copied.
Data type Copy data
Print data
Standard pattern
User pattern
Selects the folder
to be copied.
Select the copy target and then press <Start copy>.
3
Select the folder (serial number) to be copied.
4
Select the type of data to be copied.
5 Press OK .
A copying in progress screen is displayed.
Copy data ＵＳＢ→ＩＪＰ
Data type Copy data
Print data
Standard pattern
User pattern
Proc. Status
Accessing to USB memory. Don't remove USB memory.
Copying in progress.
After data copying is complete, the screen returns to the auxiliary function menu.
6
Remove the USB memory.
[Stop ]
Disable
Enable
Enable Disable
Enable Disable
Proc. Status
９９９９９９９９
Folder to be copied
Serial number ９９９９９９９９
[Stop ]
Enable Disable
Enable Disable
Disable
Enable
９９９９９９９９
Folder to be copied
Serial number ９９９９９９９９
2015.07.07 12:45
Com=0
HOME
Individual
copy
Cancel
Start copy
2015.07.07 12:45
Com=0
０／ ２０
０／ １５
０／ ４
HOME
０／ ３９
●Backing up data to USB memory 7-31
Start copy
Shows the data
copying progress.