Sony DME-7000 Maintenance Manual page 21

5. For installing the unit in the rack, press the inner
members fully to the outer members while pressing the
stoppers of the inner members.
c
• Be sure to mount the unit in the rack with two-person or
more.
Trying to handle this job by a one-person could lead to
injury.
• Be careful not to get caught your hand and finger in the
rack mount rail when installing the unit in the rack.
Rack
DME-3000/7000
6. After confirming that the unit can be moved smoothly,
tighten the screws (B5 x 8) secured temporarily in the
step 4.
n
When securing the front brackets to the rack by
screws, pull out the unit about 20 cm (8 inches) from
the rack, and fasten the screws of the front brackets to
the rack.
Outer member
Stopper
Inner member
7. After installing the unit in the rack, secure the unit to
the rack by the prepared four screws (RK5 x 16) and
four washers.
Rack
Washers
RK5 x 16
DME-3000/7000
RK5 x 16
1-7. Rack Mounting
Washers
1-13 (E)