Operation; Channel Selection; Volume Adjustment; Signal - LG Zenith LSX300 Installation And Operating Manual, Warranty

LSX300-4DM_OM (Zenith)
Operating

Channel Selection

You can select channels as described below.
• Use Number (0-9) and – (dash) buttons
to select a channel directly.
• Press BACK to return to the previous
channel you viewed.
• Use CH u/U on the Remote Control or
u/U on the front panel to select a chan-
nel through the channels in memory.
Tip
If you press any number button for
channel selection, Channel List will
appear and you can select a channel
easily on the list.

Volume Adjustment

Adjusts the sound level for audio out on
the unit.
• Use VOL +/– to adjust the sound level
for audio out on the unit.
• Press MUTE to turn off the volume for
audio out on the unit.
Caution
Removing the MUTE function may cause hear-
ing or speaker damage if the TV volume is set
too high.

Signal

You can view the signal strength bar to
help you adjust the antenna to the cor-
rect direction for your location by press-
ing SIGNAL on the Remote Control. An
audible beep accompanies the signal
strength bar.
Tip
Refer to www.antennaweb.org for antenna infor-
mation for your receiving location.
AntennaWeb.org, will help you determine the
proper outdoor antenna to use in order to receive
television channels that are broadcast locally.
12
7/16/07 2:30 PM Page 12

Auto Off

This unit will be automatically turned off,
in case of no button input for a preset
time. You can set a time using the
SLEEP button.
If you select "Off", Auto Off is not activat-
ed.
Note
The confirm message will appear before
1 mimute from Auto Off time.

Channel Banner Display

The Channel Banner shows channel
number, station name, current time, and
block information for a moment.
The Channel Banner appears whenever
you tune to a new channel or press the
(Select) button while viewing a pro-
gram.
Press (Select) to disappear while the
Channel Banner is displayed.
Note
• Station name and clock are displayed only if
they are provided by broadcaster.
• Block Information displays such as No Signal,
Rating Blocked, or Channel Blocked.