Yamaha AW2816 Owner's Manual page 173

Using the internal hard disk/external storage devices
11
Exporting tracks to WAV files
Here's how to use the TR Edit page to export (write)
audio data from tracks 1–16 to WAV files.
1
Press the [EDIT] key
The EDIT screen/TR Edit page will appear. For
details on the contents of the display, refer to
page 111.
2
Move the cursor to the TRACK menu if you
want to write data in Track units, to the
PART menu if you want to write data in
Part units, or to the REGION menu if you
want to write data in Region units. Then
press the [ENTER] key.
Tip!
To write the stereo track as a WAV file, select the
TRACK menu.
3
Move the cursor to the button of the
EXPORT command, and press the [ENTER]
key.
The parameters of the EXPORT command will
appear.
168
[F1] (TR Edit) key.
Operation section
4
According to the menu that you selected in
step 3, move the cursor to the parame-
ter(s) that you want to set, and press the
[ENTER] key.
• If you selected the TRACK menu
TRACK parameter
Select the track(s) that will be written as a WAV
file. You can select 1–16, AL, or ST. If you select a
track 1–16, the individual track will be written as
a monaural WAV file. (A paired track will be
written as a stereo WAV file.) If you select AL, a
monaural WAV file for each of the 16 tracks (or a
stereo WAV file for each pair of tracks) will be
written. If you select ST, the stereo track will be
written to a stereo WAV file.
• If you selected the PART menu
TRACK parameter
Select the track(s) that will be written as a WAV
file. You can select 1–16 or AL. The type of WAV
file that will be created is the same as for the
TRACK parameter of the TRACK menu.
START parameter
Specify the beginning of the area that will be
written as a WAV file.
END parameter
Specify the end of the area that will be written as
a WAV file.
• If you selected the REGION menu
REGION parameter
Specify the region that will be written as a WAV
file.
5
Use the [DATA/JOG] dial or [CURSOR] keys
to set the parameters, and then press the
[ENTER] key.