Yamaha 02R Owner's Manual page 213

Program 16 — FLANGE–>REVERB1
Flange effect followed by reverb. This effect is more appropriate to emphasize modulation effects than the
CHORUS–>REVERB program. Use the reverb Depth parameter to adjust the amount of reverberation.
Parameter Setting
Freq. 2.4Hz
Depth 68%
FB.Gain +37%
Mod.Dly 254.4ms
Rev.Time 2.6s
Diff. 8
Ini.Dly 10.0ms
LPF 9.0KHz
HPF 45Hz
Depth 61%
Program 17 — FLANGE–>REVERB2
This is a variation of program 16.
Parameter Setting
Freq. 3.3Hz
Depth 9%
FB.Gain –63%
Mod.Dly 0.4ms
Rev.Time 1.4s
Diff. 8
Ini.Dly 9.1ms
LPF 9.0KHz
HPF 45Hz
Depth 56%
Program 18 — EARLY REF.1
Simulates early reflections only. It can create a wide range of effects , from gate-reverb to ambience effects.
Parameter Setting
Type L-Hall
RoomSize 2.5
Liveness 2
Diff. 8
Ini.Dly 23.7ms
ER Num. 15
Hi.Ratio 0.8
FB.Gain 0%
LPF 10.0kHz
HPF THRU
Range
0.1~40.0Hz Flange modulation frequency.
0~100% Flange depth. The amount of modulation.
–99 ~ +99% Feedback gain. The amount of signal returned to the flanger.
0.0~255.0ms Flange delay. The delay time before modulation begins.
0.3~30.0s Reverb time.
0~10 Reverb diffusion.
0.1~200.0ms Initial delay between the direct sound and early reflections.
1.0kHz~THRU Low pass filter cutoff frequency.
THRU~8.0kHz High pass filter cutoff frequency.
0~100% Reverb depth. The amount of reverb.
Range
Same as program 16 Same as program 16
Range
ER type Choose S-Hall, L-Hall, Random, Reverse, Plate, or Spring.
0.1~20.0 Time interval between the early reflections.
0~10 Rate at which reflected sounds fade or decay.
0~10 Reverb diffusion.
0.1~200.0ms Initial delay between the direct sound and early reflections.
1~15 Number of early reflections.
0.1~1.0 High frequency decay ratio.
–99 ~ +99% Feedback gain. The amount of signal returned to the effect.
1.0kHz~THRU Low pass filter cutoff frequency.
THRU~8.0kHz High pass filter cutoff frequency.
Internal Effects
Description
Description
Description
Digital Recording Console 02R User's Guide
103