Table of Contents
Advertisement
Connecting a paired Bluetooth
1
Turn on this unit.
• Press and hold [
• A beep will sound, and the LED (blue) will blink slowly.
2
Perform steps 2 and 3 of "Pairing (Registration) this unit with the Bluetooth
connection". (
• When the LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed. (Connection
established)
Note
• This unit remembers the device lastly connected. Connection may be automatically established after step 1 (see
above).
• If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Turn on the unit
again.
®
device
] of this unit for approx. 3 seconds until the LED (blue) blinks.
9)
l
Preparation
10
®
device for
Advertisement
Table of Contents
