Figure 4-64 Installing Battery Connection Cable - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
System Hardware Manual
10. Using two screws, install the Battery Tray Bracket. Refer to
Figure 4-62 Removing Battery Tray Bracket on page

Figure 4-64 Installing Battery Connection Cable

11. Insert Battery Connection Cable into cable guides. Refer to
Figure 4-64 Installing Battery Connection Cable on page
12. Install the Battery Tray Cover and tighten the two screws. Refer
to Figure 4-64 Installing Battery Connection Cable on page
13. Slide the Battery Trays into the CHS LARGE BATT BOX.
14. Install the Battery Tray Suppressor while pulling the Battery
Connection Cable(s) through the cutouts provided. Refer to
Figure 4-65 Connecting Battery Cables on page
with two screws.
Issue No. 1.5
4-46.
4-47.
4-47.
4-48. Secure
4 - 47