Proximity Profile With Two Pan1740/1740A Usb-Dongles (Example) - Panasonic PAN1740 Design Manual


5 Proximity Profile with two PAN1740/1740A
USB-Dongles (Example)
This example uses Dialog's SDK version 3.0.2.1.
The following requirement must be met:
®
 Microsoft Visual C++ 2010 Express – Freeware Compiler is installed.
Receiver Configuration
1. Navigate to DA14580_SDK_3.0.2.1\dk_apps\keil_projects\proximity\
monitor_fe_usb.
2. Download the image proximity/monitor_fe_usb into the USB-Dongle.
For details please refer to
3. Open Keil Compiler and compile this project.
Download the .hex-file
4. Start and stop the debug mode or load the .hex-file with the Connection Manager.
For debug mode using the Keil Compiler, be sure to check the Configure Flash Tool
setting described in
Design Guide Rev. 1.0

5 Proximity Profile with two PAN1740/1740A USB-Dongles (Example)

Use always the latest release from Dialog website.
 4 Run the Keil Project
 4 Run the Keil Project
PAN1740/1740A Bluetooth Module
(Example).
(Example).
Page 16