Table of Contents
Advertisement
Cooking process
For example, you switch on a cooking
zone at the highest power level to
heat a pan for frying. After approx.
10 seconds to 4 minutes, you then
reduce the power level (60 seconds
to 5 minutes for a radiant cooktop).
The rangehood recognises a cooking
process.
The rangehood switches itself on and
when the cooktop power level has been
reduced, the rangehood switches to
power level 3 and remains at that level
for approx. 5 minutes.
After that the rangehood power level is
determined automatically by the
Con@ctivity function.
You can select another power level
manually before then.
Switching off
Switch off all cooking zones.
The power level is gradually reduced
until the fan finally switches off.
This helps to neutralise any lingering
vapours and odours in the air.
Depending on the last active fan level,
the process takes 2 to 5 minutes.
30 seconds after the fan is switched off,
the cooktop lighting switches off.
The deflector plate retracts 1 minute
later.
The cooking process is finished.
Operation (automatic mode)
Leaving automatic mode
temporarily
To leave automatic mode temporarily
during cooking:
Manually select a different power
level, or
Manually switch the rangehood off, or
Activate the run-on function on
the rangehood. The fan will switch
itself off after the selected run-on
time, and the lighting will remain on.
The rangehood functions are now
operated manually (see "Operation
(manual mode)").
If you switch off the fan manually in
Plug&Play mode, it continues to run at
level 1 (see "Operation (Manual mode)
– Switching off the fan").
Returning to automatic mode
The rangehood returns to automatic
mode:
- if the rangehood has not been used
for approx. 5 minutes after selecting
a power level manually, or
- if the manually selected power level
corresponds to the automatic one
again, or
- the rangehood fan and the cooktop
have been switched off for at least 30
seconds.
Automatic mode will resume next
time the cooktop is switched on.
25
Advertisement
Table of Contents
