3
Start playback on the video equipment connected to the
Glasstron.
4
Adjust the volume by turning the VOL control.
When you set the AVLS ON/OFF switch to ON, you cannot turn up the volume beyond
the defined limit (see page 22).
5
Check that the four corners of the screen are clear.
If the four corners of the screen are not clear, do the step 2 (page 20) to check the screen
position alignment again.
6
Adjust the brightness by turning the BRIGHT control.
VOL
lower
louder
BRIGHT
−
+
less bright
brighter
continued
21
-GB