Figure 6: Mobile Companion Application Qr Code - Motorola L6Q Installation Manual

MN008660A01-AA
Chapter 2 : Getting Started
2.2
Downloading the Mobile Companion Application
When and where to use: The Mobile Companion application is required to set up, manage, and view
information about L6Q cameras. The Mobile Companion is used to pair the camera to the application,
register the camera with PlateSearch or Client Portal, and perform camera aiming.
Procedure:
To download the Mobile Companion application from the Apple iOS App Store or the Google
Play Store, perform one of the following actions.
• Tap the link appropriate to your mobile phone.
Apple App Store
• Scan the QR code.

Figure 6: Mobile Companion Application QR Code

2.3
Installing a SIM Card and SD Card
When and where to use: Each L6Q camera requires an activated SIM card to connect to the Internet
and upload detections to PlateSearch or Client Portal. A slot for an optional SD card is also provided
for additional onboard storage to buffer detections in the event of connection loss.
NOTE: The SIM card and optional SD card must be installed before powering the unit on for the
first time.
Procedure:
1 Remove the L6Q Camera, Camera Battery Tray, USB-C Cable, and the Pin & Torx Tool from
the box or Rapid Deployment Carry Case.
2 To identify the slot type and proper card orientation in the battery compartment, locate the SIM
and SD Card slots. Refer to the label next to each slot.
12
GooglePlay