Important Safety Instructions - Philips AZ1047 User Manual

EN
Important
1
Safety

Important Safety Instructions

a
Read these instructions.
b
Keep these instructions.
c
Heed all warnings.
d
Follow all instructions.
e
Do not use this apparatus near water.
f
Clean only with dry cloth.
g
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
h
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
i
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
j
Only use attachments/accessories specified by the manufacturer.
k
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the ap-
paratus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over.
l
Unplug this apparatus during lightning storms or when unused for long periods of time.
m
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
n
Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage,
or damage to the unit:
•
Install all batteries correctly, + and - as marked on the unit.
•
Do not mix batteries (old and new or carbon and alkaline, etc.).
•
Remove batteries when the unit is not used for a long time.
o
Apparatus shall not be exposed to dripping or splashing.
p
Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
q
This product may contain lead and mercury. Disposal of these materials may be regulated due to environ-
mental considerations. For disposal or recycling information, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org.