Panasonic 3000 Operating Instructions Manual page 69

Sending Documents via LAN
4
Make sure that the setting is on
.
OK
Dial by any combination of the following methods:
• Manual Email Addressing press
station is entered. (Up to 70 stations)
• Phone Book Email Addressing. (Up to 200 stations)
5
The document(s) is stored memory with a file
number.
The machine then connects to the LAN and
transmits the Ledger size document(s).
(After the document(s) are sent, the "07 LEDGER
EMAIL XMT" Select Mode will automatically return
to the preset position (ON).)
To send with reduction, follow the steps below.
Repeat Steps 1 to 5, except in Step 3, set the "07 LEDGER EMAIL XMT" setting to "OFF" position.
When the Select Mode "07 LEDGER EMAIL XMT" setting is set to the "OFF" position, the transmission
reduction is according to the setting of Fax Parameter No. 141 (LAN XMT REDUCTION). (See the Table
below)
LEDGER EMAIL XMT = ON : Transmits actual document size (without reduction).
LEDGER EMAIL XMT = OFF : Reduces LEDGER size document to B4 size or to A4/Letter before
Document Size
LEDGER
B4
A4/Letter
(see Note 1)
NOTE
1. Factory default setting for Fax Parameter No. 141 (LAN XMT REDUCTION) is "Invalid".
ON
SET
transmission. (According to the Fax Parameter No. 141 (LAN XMT
REDUCTION) setting, see Table below)
LEDGER EMAIL XMT = ON
LEDGER
B4
A4/Letter
BASIC OPERATIONS
and press
MEMORY XMT
AMERICA
panasonic.usa@panasonic.com
after each
Email
AMERICA
AFRICA
Email
ANTARCTICA BRAZIL
Email
APOLLO
JOB
STATUS
Document Size Transmission
LEDGER EMAIL XMT = OFF
Fax Parameter No. 141
(LAN XMT REDUCTION)
set to "Invalid"
B4
B4
A4/Letter
STN(S):001
Email
ASIA CHINA
BERLIN
Email
1/1
Email
CANADA
MEMORY XMT
LIGHTER DARKER
KEYBOARD ORIGINAL
Fax Parameter No. 141
(LAN XMT REDUCTION)
set to "Valid"
A4/Letter
A4/Letter
A4/Letter
69