Bosch AMC2 Installation Manual page 15

AMC2 enclosure with 1 DIN rail
12 V mode operation using two batteries
1.
2.
3.
4.
5.
6.
Bosch Security Systems B.V.
Set the switch of the power supply unit to 12 V.
Connect the 2-pin plug to the power supply interface
labeled BAT.
Connect 1b (black) to the rechargeable negative (-)
terminal of the battery.
Connect 1a (red) to the rechargeable positive (+) terminal
of the battery.
Connect 2b (black) to the second rechargeable negative (-)
terminal.
Connect 2a (red) to the second rechargeable positive (+)
terminal of the battery.
Connections | en
2021-03 | V06 | F.01U.330.018
15