Advertisement
3. Before Using
Before using this product
Please follow the instructions below to use the B-FP800-AC-QM-S correctly.
The B-FP800-AC-QM-S is an AC adapter designed for charging the battery pack loaded in the B-FP2D series portable
printers, not for directly supplying the power to the B-FP2D series portable printers.
DO NOT connect this AC adapter to any devices other than the B-FP2D series portable printer. We assume no
responsibility for any results arising from a connection to other devices.
Before connecting this AC adapter to the printer, please make sure that the battery pack is in the printer. We are not
responsible for any results due to a failure to do so.
Connecting the AC adapter to the printer
When charging the battery pack loaded in the B-FP2D series portable printer, use the following procedure to connect
the AC adapter to the printer.
For how to check the charge status, please refer to the Owner's Manual of the B-FP2D series portable printer.
Make sure that the battery pack is in the printer.
1
Connect the AC adapter to the DC IN connector of the printer.
2
Connect the power cable to an AC outlet.
3
When the AC adapter is plugged in, the charger lamp lights up in orange, and charging starts.
4
Whether the battery charge is required or not is automatically determined by the printer.
When the charging is completed, unplug the power cable from the AC outlet and disconnect the
5
AC adapter from the printer.
Charging time may differ depending on the condition of the battery pack or the operating temperature.
[ 3 ]
No.
1
AC adapter
2
Plug
3
DC IN connector
[ 2 ]
Name
[ 5 ]
[ 4 ]
[ 1 ]
No.
4
Power cable
5
Power plug
6
AC outlet
[ 6 ]
Name
3. Before Using 7
Advertisement
