Hitachi CP-X2520 Service Manual page 30

6-13 HIDDEN SERVICE MENU
STARTUP TYPE
Select the startup screen type. 1 : shows Hitachi Logo
PANEL TIME
Use time of LCD panel. Reset the PANEL TIME whenever you changed the LCD prism assembly.
LONG KEY
You can select the remote control button operation mode. NORMAR ↔ LONG
The LONG allows to control the projector with the remote control unit when you hold a button of it for about 3seconds,
and makes MY BUTTON 1/2 function as LONG KEY DISABLE/LONG KEY ENABLE compulsorily. If you use
these buttons to control the projector as you assigned with the MY BUTTON menu, set to the NORMAL.
SOFT RESET
If this is executed, all of the user data is initialized.Never use it when not required.
6-14 RUN TIME window
Set operating time display method (accumulated lamp time display method)
1. Select "OPTION" from the Advanced menu, then place the cursor on the "LAMP TIME".
2. Press the [ ], [ENTER] or [RESET] button.
3. Press the [Reset] button once, then press [KEYSTONE] button of the remote control for 3 seconds or
more to display the screen shown below. (The menu will close after 10 seconds if there are no further
operations.)
4. Use [ ] or [ ] to select the usage status number. (The usage status is as shown below.)
Usage status number
CP-X2520 ( M2-25ED ) / CP-X3020 ( M2-30ED )
To display the OSD for "HIDDEN SERVICE MENU" set up.
By the control panel
1. Display the Advanced menu by
the "MENU" button.(If EASY
MENU appears, choose "Go to
Advanced menu" to display
ADVANCED MENU.)
2. Select the "OPTION" on the
menu.
3. Continue press the button [ ]
fi rst, then press the button [ ]
together with "INPUT", and hold
for 3 seconds.
2 : No Hitachi Logo
← Lamp time
← Lamp time ( Normal )
← Lamp time ( ECO )
← AC energizing time
← Number of times on
← Number of times off
← Usage status number(See below)
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
By the remote control transmitter
1. Display the menu by the
"MENU" button. (If EASY
MENU appears, choose "Go to
Advanced menu" to display
ADVANCED MENU.)
2. Select the "OPTION" on the menu.
3. Press the "MAGNIFY OFF"
button.
Next hold the "MAGNIFY OFF"
button for 3 seconds.
30