4Gbp - HP A-F1000-E Installation Manual

Interface calbes
For how to connect a 4GBE/8GBE interface cable, see

4GBP

Introduction
A 4GBP high-speed Layer 3 Gigabit Ethernet interface module provides four Small Form-Factor
Pluggable (SFP) interfaces. Each interface is provided with an LED, which indicates the running status of
the interface.
Front panels
Figure 37 Front panel of 4GBP
1
4
(1) Captive screw
(3) SFP interface status LED
LEDs
Table 30 Description of LEDs on the front panel of 4GBP
LED status
Off
Solid green
Flashing green
Interface specifications
Table 31 Interface specifications of 4GBP
Item
Connector type
Interface standards
Supported frame
format
Optical
transmit
power
2 3
Description
No link is present.
A 1000 Mbps link is present.
The port is receiving or sending data at 1000 Mbps.
Specification
SFP
802.3, 802.3u, 802.3ab
•
Ethernet_II
•
Ethernet_SNAP
Multi-mode
Type
short haul
Min. –9.5 dBm
"Installing the
(2) SFP interface
(4) Ejector lever
Single-mode
Long haul
medium haul
–9 dBm –2 dBm
56
firewall."
Long haul Ultra-long haul
–4 dBm –4 dBm