Bats/Batv (Main) Board And Hlr2 Board Removal; Kdl-22Ex425 Only - Sony KDL-22EX425 Service Manual

BATS/BATV (MAIN) BOARD AND HLR2 BOARD REMOVAL

NOTES:
Refer to "Handling the FFC Connector" on page 3
The Insulation Sheet (G1), Insulation Sheet (G4), Insulation Sheet (G10), and Side Jack Label (Label BAT-V Mold
Side) are not included with the LCD Panel and must be replaced when replacing the LCD Panel.

KDL-22EX425 ONLY

NOTE: The KDL-22EX425 Models is available in Black or White Please be sure to order the correct replacement
part based on the color of the TV
A Remove 6 screws from BATS Board
B
Disconnect 5 connectors from BATS Board
Refer to "Handling the FFC Connector" on page 3
C
Release clips and disconnect 1 connector from HLR2 Board to detach from LED Guide
KDL-22EX425/32EX425/32EX525/40EX525/46EX525
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
to disconnect the LVDS Connector.
A
B
C
NOTE: The components identified by shading
and mark are critical for safety. Replace only
!
with part number specified.
354
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
351 4-266-730-82 BEZEL (22 SYR) (FOR BLACK MODELS)
351 4-266-730-62 BEZEL (22 SYR) (FOR WHITE MODELS)
352 A-1816-030-A BATS BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU MUST
UPDATE THE SOFTWARE TO THE LATEST VERSION.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
351
352
353
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
353 A-1817-204-A HLR2 BOARD, MOUNTED (FOR BLACK MODELS)
353 A-1817-205-A HLR2 BOARD, MOUNTED (FOR WHITE MODELS)
354 4-268-447-01 SHEET, INSULATION (G1)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
2-990-421-41 SCREW (+PSW) (M3X6)
58