Warranty; Regulation; Environment; Measuring Method - Toshiba LTA057A341F Specification

9. Warranty

Warranty clause will be decided separately.

10. Regulation

10.1 Regulation
The set (which our LCD module is assembled into) to conform the regulations below, take measures in set side.
Toshiba Matsushita Display Technology is not liable for the regulations to the complete set, nor can guarantee our
LCD module conform the regulation by itself.
a) Examples of EMI Regulations
FCC
VCCI
CISPR
b) Examples of Safety Regulations
IEC 60950
UL 60950

10.2 Environment

This LCD module is not used or contained over maximum concentration value of any substance prohibited by RoHS's
Requirement.

11. Measuring Method

11.1 Measuring System
(1) The measurement point is the center of the active area except the measurement of Luminance Uniformity.
(2) Photometer : BM-7/BM-5A TOPCON (Aperture 2°)
Toshiba Matsushita Display Technology Co.,Ltd
Specification No. TENTATIVE
: PART15 CLASS B
: CLASS B
: CLASS B
X-Y stage
LCD Module built in Backlight
Screen Center
LCD Module Driving Circuit
Stage Controller
500 mm
Light Shielded Room
Date: 2008 – 11- 07
Date: - -
←# Special
Photmeter
New No. LTA057A341F-14
Old
No.
←& Addition
Sheet
33
← Change