2. Control Functions
Control of Master/Slave group
2.3.6 Method for setting and confirmation of operation conditions through the LCD
screen
Conducts the setting of the control of Master/Slave group and confirmation of operation conditions through the LCD screen.
48
SMGB0097 rev.0 - 07/2015
In the case of master
unit (unit 1) setting
Set the setting temperature difference (when the 1st water
temperature setting is enabled)
Set the setting temperature difference (when the 2nd water
temperature setting is enabled)
In the case of slave unit
(units 2 to 8) setting
If there are more
than 5 units con-
nected, shift to
priority setting
screen of units
after unit 5