Operation Via The Browser; Live Page - Bosch FLEXIDOME panoramic 5100i User Manual

FLEXIDOME panoramic 5100i | FLEXIDOME
panoramic 5100i IR
3

Operation via the browser

3.1

Live page

After the connection is established, the Live page is initially displayed. It shows the live video
image on the right of the browser window. Depending on the configuration, various text
overlays may be visible on the live video image.
Other information may also be shown next to the live video image. The items shown depend
on the settings on the 'Live' functions page.
Connection
In the Connection group, you can configure the Dewarping and the Stream option.
Dewarping
Notice!
i
For client-side dewarping, it is recommended to use Configuration Manager, BVMS, or a third-
party video management system. Edge dewarping will be supported in a future firmware
release.
You can select one of the three available video channels for viewing:
1.
2.
–
–
–
–
–
–
3.
Image selection
To view a live stream:
1.
2.
3.
Digital I/O
(Only applicable to FLEXIDOME panoramic 5100i IR: NDS-5703-F360LE, NDS-5704-F360LE)
Depending on the configuration of the unit, the alarm input and the output are displayed next
to the image. Expand the Digital I/O group if necessary.
The alarm symbol is for information and indicates the status of an alarm input:
–
The alarm output allows the operation of an external device (for example, a light switch or a
door opener).
–
Bosch Security Systems B.V.
On the left side of the browser, expand the Connection group if necessary.
Click the Dewarping drop-down arrow to see the options. The options include:
Off
E-PTZ
Full panoramic: One panoramic image is shown.
Double panoramic: Two independent panoramic images are shown. They can be adjusted
independently on the Live preview.
Corridor: Two independent corridor images are shown. They can be adjusted
independently on the Live preview.
Quad: Four independent panoramic images are shown. They can be adjusted
independently on the Live preview.
Select the dewarping option you wish to use.
On the left side of the browser, expand the Connection group if necessary.
Click the Stream drop-down arrow to see the options.
Select the stream you wish to view.
The symbol lights when the input alarm is active.
To activate the output, click the checkmark symbol.
– The symbol lights when the output is activated.
User manual
Operation via the browser | en
2022-01 | V01 | F.01U.385.628
9