Installing the Scanner Mount
The Scanner mount kit contains the following items:
side accessory mount (PN KT-ACCMNT-VC70-R) with two screws, two captive lock washers and flat
•
washers
scanner mount (PN KT-SCANMNT-VC70-R) with four screws, four captive lock washers and flat washers
•
Attach the scanner mount to the side accessory mount, using four M4x10mm screws with captive flat and lock
1.
washers. Tork the screws to 8 + 10% kgf-cm (7 + 10% lbs-in).
Attach the side accessory mount to the VC70, using two M5x14mm screws with captive flat and lock
2.
washers.Tork the screws to 20 + 10% kgf-cm (17 + 10% lbs-in).
Side Accessory
Mount
Screws
Scanner Mount
Installing the Scanner Bracket
Figure 2-24
Screws
Installation 2 - 23