Rear Panel Facilities; Name And Function Each Section - Hitachi HV-D30 Operation Manual

Name and function each section

MENU button
Press this button to display the
camera setup menu. The switches U,
D, L and R provide
functions depending on whether the
menu is displayed (MENU mode) or
not (DERECT mode).
VIDEO conector
Outputs a composite
signal(1Vp-75 hms).
Pilot lamp
Lights when power
supplied.
REMOTE connector
Used for connection with the
remote control box RC-Z3 or
personal computer
.
DC IN connector
The 12V power supply is
connected.
MULTI connector
Output for RGB, Y/R-Y/B-Y, or
Y/C and VBS signals.
Also used for sync signal I/O and
external trigger signal input.
For details of each connector, refer to the description of connectors (page 46).
different
video
is
AWB/L button
DERECT mode:
Holding down this button for more than
two seconds carries out auto white balance
(AWB).
MENU mode:
In this mode, it is allowed to change
functional data or carry out each
function.
U button
DERECT mode:
While holding
button for more than two
seconds and
button carries
shading compensation (ASC
MENU MODE:
Pressing this button moves
FILE/R button
DERECT mode:
Selects the scene file. Press
once to show the present file
name for 1 second. During
the display, press again to
change the scene file.
MENU mode:
In this mode, it is allowed to
change functional data or
carry out each function.
BAR/D button
DERECT mode:
Press this button to turn
on/off a color bar signal.
MENU mode:
Pressing this button moves
the cursor up.
LENS connctor
Lens iris
connector; connect
down this
press the D
out auto
ASC).
control signal
the iris
5