Hitachi 40HBD06U Quick Manual

Download this manual

QUICK GUIDE

40HBD06U

444-7889

Please read this quick guide fully before installing or operating because it contains important setup information and keep for

future reference.

For any help concerning set up and use of your TV please call theCustomer Helpline:

0345 604 0105

Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday

IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides,

rear and top of the TV. This is to allow for adequate ventilation during operation. Please read the

main Users Guide for more safety information before installation.

insert the batteries into your handset

either connect the aerial straight to your TV...

Aerial (RF)

Lead

wall

socket

SPDIF

Coax.OUT

Aerial (RF) Socket

Page 1 QUICK GUIDE 40HBD06U 444-7889 Please read this quick guide fully before installing or operating because it contains important setup information and keep for future reference. For any help concerning set up and use of your TV please call theCustomer Helpline:...
Page 2 Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These leads can be purchased from your Hitachi dealer or any good High Street electrical retailer..or through a HDMI and YPbPr products (DVD-RW)
Page 3 ...or through a VCR and satellite decoder. TFT-LCD TV SPDIF Coax.OUT • Scart Lead to AV-1 on TV. RF Lead from RF Lead VCR to TV from VCR to ANT.IN Satellite Aerial RF Lead to Aerial Satellite LNB lead ANT.IN AV-1 AV-2...
Page 4 connect the TV plug to the mains socket UK plug insert plug..and switch on Press OPERATE/STANDBY button on the remote control or press the control switch,located on the left side of the TV. The TV will then switch on. Rear view 1.
Page 5 start A.P.S. (Auto Programming System) When the TV is operated for the first time, installation wizard will guide you through the process. First, language selection screen will be displayed. • Use "up" or "down" buttons to select your language and press OK button to set selected language and continue.