Removal And Installation Of Exterior Parts - Sony HDW-700A Maintenance Manual

2-3. Removal and Installation of Exterior Parts

2-3. Removal and Installation of Exterior Parts
Front Lid
Loosen the two screws fully and remove the front lid.
(Stoppers are provided for these screws.)
Screws with stopper
Strap
Screw with stopper
Inside Panel
1.
Loosen the four screws fully and turn the inside panel in the arrow direction.
(Stoppers are provided for these screws.)
2.
Disconnect the three flexible card wires from the connectors
(CN140, 141, 142).
Remove the strap screw (PWH2.6 x 5).
3.
4. Remove the joining link screw (PWH2.6 x 5).
2-8
Screws with stopper
PWH2.6 x 5
CN140
Screw
with stopper
Outside Panel
1. Remove the front lid.
2. Loosen the four screws fully and remove the outside panel.
(Stoppers are provided for these screws.)
Screws with stopper
CN142
CN141
Flexible card wire
Flexible card wire
Connector
A
*
Conductor side
How to disconnect
Slide the two sections marked * of the connector in the
direction of the arrow (white), and disconnect the flexible
card wire.
How to connect
1)
Lift the two sections marked * of the connector in the
direction of arrow A, and insert the flexible card wire fully
2) Push in the two sections marked * of the connector in the
direction of the arrow (black).
Joining link
Screw with stopper
PWH2.6 x 5
Screw with stopper
Flexible card wire
*
Flexible card wire
Blue (Insulator side)
HDW-700AE MMP1
.