Wireless Network - D-Link DIR-822 User Manual

Section 4 - Configuration
From this page you can configure your wireless network settings. There
are two tabs for 2.4 GHz and 5 GHz. 802.11n/g/b operate on 2.4 GHz, while
802.11ac/n/a operates over 5 GHz. 2.4 GHz and 5 GHz networks are configured
independently.
General Settings
Toggle this switch to enable wireless access.
Enable Wireless:
To enable/disable Wi-Fi connection on a schedule, click the Set
schedule button ( ). In the opened window, you can create a
new schedule (see the Schedule section Simplified mode on page
119page 118).
Select a wireless mode from the list.
Wireless mode:
Toggle this switch to enable to allow the router to automatically select
Select channel
an operating channel.
automatically:
Toggle this switch to enable higher channels.
Enable additional
channels:
If Select channel automatically is disabled, select the channel your
Channel:
router will use.
Toggle this switch to periodically scan for an optimal channel.
Enable periodic
scanning:
D-Link DIR-822 User Manual

Wireless network

60