Page 1
2008 年 月 日 9 19 責任者 担当者 法規 船 難 関 本 波 口 Operating Instructions SDI Card AW-PB504N Model No. Before operating this product, please read the instructions carefully and save this manual for future use. VQT0H53-2...
Page 2
Safety precautions WARNING: CAUTION • TO REDUCE THE RISK OF FIRE OR SHOCK RISK OF ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO DO NOT OPEN RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, • TO REDUCE THE RISK OF FIRE OR SHOCK DO NOT REMOVE COVER (OR BACK).
Page 3
Safety precautions For CANADA FCC Note: This Class A digital apparatus complies with Canadian This equipment has been tested and found to comply ICES-003. with the limits for a class A digital device, pursuant to Cet appareil numérique de la class A est conforme à Part 15 of the FCC Rules.
Page 4
Safety precautions IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 10) Protect the power cord form being walked on or pinched par ticularly at plugs, convenience 2) Keep these instructions.
Contents Introduction ............... 5 How to set up the system ..........9 Precautions for use ............6 Appearance ..............10 Major operating controls and their functions ....7 Specifications ..............11 Mounting ................8 Accessories ..............11 Introduction Installing this SDI card in a convertible camera such as the ...
Precautions for use • Power off before connecting or disconnecting cables. • Avoid humidity and dust. Before plugging or unplugging the cables, be sure to switch Avoid using the product at a humid, dusty place because power off. much humidity and dust will cause damage to the parts inside.
When the AW-E860 is used, set this switch at the E860. equipped with a remote control function for zoom focus. When using a Panasonic pan/tilt head (such as the 3: DATA CLIP <NORMAL/CLIP> AW-PH300A and AW-PH350), use the LENS I/F (Factory setting: NORMAL) connector on the pan/tilt head instead of this connector.
Mounting NOTE Rear panel Be sure to ask your store, where you purchased the product, for mounting. Disconnect the camera power connector before mounting. Before handling the SDI card, touch a metal part of the camera to discharge the static from the human body. An anti-static wrist strap is recommended for added safety.
How to set up the system Before cable connection, switch power off. Use the AC adapter AW-PS505A for power supply. Use the DC cable supplied to AC adapter. For details on connecting individual devices, refer to the respective operating instructions. ...
Specifications Source voltage: DC 12 V (supplied from camera) Power consumption: Approx. 1.15 W indicates safety information. Output: 270 Mbps component output (compliant with the SMPTE 259M standard) Operating temperature: +14°F to +113°F (–10°C to +45°C) Operating humidity: 30% to 90% (without condensation) Dimensions (WHD): 7/8”2-3/4”4-3/8”...
Page 12
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA Headquarters: 3 Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-5300 EASTERN ZONE: 3 Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196 WESTERN ZONE: 3330 Cahuenga Blvd. West, Los Angeles, CA 90068 (323) 438-3608...