5-22 Installing the Operating System with Express Setup
Graphics Accelerator Driver
The driver for the standard graphics accelerator will be installed automatically. The following
procedure describes how to install it manually::
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disc drive.
If the autorun menu appears, close the menu screen.
2.
Click [Start], click [Programs], click [Accessories], and click [Windows Explorer].
3.
Run "setup.exe" in the following directory:
\001\win\winnt\dotnet\video\matrox\setup.exe
4.
Follow the messages to continue the installation.
If the message "Digital Signature could not been found" appears, select [Yes] to continue.
5.
Remove the NEC EXPRESSBUILDER DVD from the optical disc drive and restart the
system.
Installing N8403-018 FibreChannel Controller
If you use the FibreChannel Controller (N8403-018), update your system with the NEC
EXPRESSBUILDER DVD.
The FibreChannel Controller driver will be installed automatically.