Table of Contents
Advertisement
en
10 Storage and transport
The handling of modules requires great diligence. There-
fore, caution is required when unpacking, transporting
and temporarily storing these modules:
Important Notice!
Do not set the modules down forcefully on hard
ground or on the edges.
Avoid bending during transport or when unpacking.
Do not drop the modules.
Do not place any objects on the modules.
Do not handle the modules using sharp objects.
In the course of storage and transport, it must be
ensured that each solar module is sufficiently rein-
forced.
Bosch Solar Module c-Si M 48 EU I Bosch Solar Module c-Si M 60 EU I Bosch Solar Module c-Si M 60 S EU I Bosch Solar Module c-Si P 60 EU Bosch Solar Energy AG
The stacking of packaging units can cause damage to
the solar modules and must definitely be avoided!
The solar modules are to be secured against overtur-
ning!
Layer pads must be used between the individual
solar modules.
We recommend storing all solar modules in dry interior
rooms and in the original packaging until their final
installation.
When setting the modules down or transporting them to
the immediate installation site (e. g. a roof), any damage
to the module is to be avoided.
The modules may not be grasped and transported on a
single frame component!
Installation guide last updated: 02/2012
Storage and transport | 11
Advertisement
Table of Contents
