Inserting The Height Module; Topping Up With Nutrient Solution; Harvesting Plants; Setting Sleep Mode - Bosch MSGP3L User Manual

Smart indoor gardening device
Hide thumbs Also See for MSGP3L:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
Insert the power supply.
8.
→ Fig.
13
a The light unit lights up pink and the
pump starts the automatic water-
ing cycle.
→ Fig.
14
a You have started growing your
seeds: the sprouting phase is be-
ginning.

Inserting the height module

Remove the light unit when the first
1.
leaves appear.
→ Fig.
15
To remove the light unit, hold the
docking unit with your hand.
Place a height module on the
2.
docking unit.
→ Fig.
16
Place the light unit on the height
3.
module.
→ Fig.
17
The light unit lights up white as
soon as one or more height mod-
ules are used.
Insert another height module when
4.
the plants almost come up to the
light unit.
→ Fig.
18
Note
¡ Use a maximum of 4 height mod-
ules at any one time.
¡ Do not alternate more than 2 light
modules with 2 standard height
modules.
Topping up with nutrient solu-
tion
If the nutrient solution has run out
completely, the light unit will flash
blue every 5 minutes and the pump
will stop.
Mix up the required quantity of nu-
1.
trient solution.
→ "Mixing nutrient solution",
Page 26
Slowly pour the nutrient solution
2.
into the plant tray.
→ Fig.
19
Maximum capacity has been
reached when the light unit flashes
white twice.

Harvesting plants

You can start harvesting your
1.
plants or fruit when they are big
enough.
→ Fig.
20
Once you have harvested your
2.
plants in their entirety, descale all
parts and clean them thoroughly.
→ "Cleaning and servicing",
Page 28

Setting sleep mode

The device automatically goes into
sleep mode after 16 hours of activity
and wakes up again after 8 hours.
To change the start time of sleep
1.
mode, wait until the time you re-
quire.
Touch the touch button for
2.
3 seconds until the light unit
flashes white twice.
→ Fig.
21
a The device starts the 8-hour sleep
mode.
a The start time for sleep mode is
saved and is retained until it is
changed again.
Note: Sleep mode should begin in
the evening so as to give your plants
time to rest in the dark. This also
means you won't be disturbed by the
bright light, e.g. in the bedroom.
Basic operation en
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msgp3l/01

Table of Contents