Advertisement
Features
The CSPK-5000E System Keyboard is the primary input device for
programming and operating the CSP-5000E System Controller. It comes
with the following features:
• You can switch any camera to any monitor manually.
• Control can be done with just one hand. The joyball responds to pressure
from the palm of the hand for intuitive control of the variable-speed
motors in pan/tilt units, while the keys offer simultaneous control of lens
functions (zoom, focus and iris).
• Camera site control features include camera power on/off, wiper on/off
and AUX keys.
• You can set up the system configuration (date & time, keyboard monitor,
etc.).
• You can also configure the input signal (identification, cable
compensation, receiver type, VD synchronization, etc.)
• Surveillance can be programmed with use of sequence, tour, event, and
group.
• Alarms can be set up and logged for later viewing.
• You can use system partitioning to specify which of the cameras,
monitors and setup menu items are available to each operator. Well-
chosen system partitions can limit the scenes available to each operator,
contributing to more efficient surveillance and enhanced system security.
4(EN)
Precautions
On safety
• Operate on 220 to 240V AC.
• Do not drop or place heavy objects on the power cord. If the power cord
is damaged, turn off the power immediately. Using the unit with a
damaged power cord will result in hazard.
• Disconnect the power cord from the AC outlet by pulling on the plug.
Never pull the cord itself.
• If you spill liquid or drop flammable or metal objects into the cabinet,
unplug the unit and have it checked by qualified personnel before
operating it any further.
On installation
Do not expose the unit:
• to extremety low or high temperatures. Use the unit at a temperature
from 0˚C to 40˚C.
• to direct sunlight or near heat sources such as radiators or air ducts.
• to damp or dusty location.
• to strong vibration.
• to devices which genarate strong magnetic fields.
• to devices such as radios or TVs which generate strong radio frequency
energy.
On handling
Do not drop the unit or subject it to severe shock.
On cleaning
Clean the cabinet and panel with a dry, soft cloth. Do not use solvents
such as thinner, benzine, alcohol and other volatile liquids, as they may
damage the finish.
On transportation
Protect the keyboard from impact by transporting it in its original carton or
protective case.
5(EN)
Advertisement
Chapters
