Mounting To A Yamaha Vehicle - Yamaha ADVENTURE PRO Owner's Manual

Hardware.
ATTACH MOUNT TO YAMAHA VEHICLE
• Using the supplied allen tool attach the
torque ring to the passenger grab bar.
• Attach the mount arm to the torque ring
• Attach the mount base plate to the GPS
cradle
CONNECT CRADLE TO MOUNT
• With the RAM mount base plate attached to
the GPS cradle connect the ball joint into the
mount arm
CONNECT CRADLE HARNESS TO
VEHICLE
Push the male-end 4pin connector into the 4pin
recepticle
CONNECT GPS TO CRADLE
The GPS sits in the cradle and will snap into
place. To remove the GPS press the button at
the top of the cradle to release it.
8