Microphone Jack
The microphone jack allows you to connect an external mono microphone. Your microphone must be
equipped with a 1/8"(3.5 mm) mono mini-plug in order to fit into the microphone jack of your
notebook. In order to connect a microphone follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
D
EPENDING UPON YOUR SYSTEM CONFIGURATION
DUAL PURPOSES
CONFIGURATIONS
External Video Port
The external video port allows you to connect an external monitor or LCD projector. In order to connect
an external video device, follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
3
Tighten the two hold-down screws, located on
each end of the connector.
P
RESSING THE
YOUR DISPLAY VIDEO
,
CHOICE
,
ONLY
FINALLY MOVING TO BOTH THE BUILT
. O
N CONFIGURATIONS
,
THE JACK SERVES AS A STEREO MICROPHONE
[F
] + [F10]
N
KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND
. E
ACH TIME YOU PRESS THE KEY COMBINATION
-
STARTING WITH THE BUILT
97 - Device Ports
,
THE MICROPHONE JACK MAY SERVE SINGLE OR
,
THE JACK SERVES AS A MONO MICROPHONE JACK
,
IN DISPLAY PANEL ONLY
MOVING TO THE EXTERNAL MONITOR
-
IN DISPLAY PANEL AND AN EXTERNAL MONITOR
. O
/
-
.
LINE
IN JACK
,
YOU WILL STEP TO THE NEXT
.
N OTHER