Table of Contents
Advertisement
HS-67WL_UG_en_Draft10_with_FCC&IC_notice.fm Page 11 Tuesday, December 23, 2008 10:26 AM
G e t s t a r t e d
You can pair the loopset with up to eight devices but connect it to only
one device at a time.
Disconnect the loopset
To disconnect the loopset from your device, switch off the loopset, or
disconnect it in the Bluetooth menu of your device.
You do not need to delete the pairing with the loopset to disconnect it.
Reconnect the loopset
If the loopset loses the connection to your device when it is switched on,
the loopset vibrates three times and beeps about once a minute.
To reconnect the loopset to the phone or music player that you have last
used with it, switch the loopset off and back on. Alternatively, if the
loopset is switched on, make the connection in the Bluetooth menu of
your device, or press and hold the multifunction key for about 2 seconds.
When the connection is established, the loopset vibrates once and beeps
twice.
You may be able to set your device so that the loopset connects to it
automatically. To activate this feature in a Nokia device, change the
paired device settings in the Bluetooth menu.
11
Advertisement
Table of Contents
