LG STB-3000 Setup Manual page 22

EZ-Manager Wizard (Cont.)
Manual Pro:Centric Configuration
1. With the Searching for Pro:Centric Server screen on display, use the arrow keys on the Installer
Remote to select/highlight MANUAL PRO:CENTRIC at the bottom right of the screen, and then
press OK.
In the Pro:Centric Manual Configuration screen (see examples below), you will be able to
configure the appropriate Pro:Centric settings in the STB. Use the Up/Down arrow keys on the
Installer Remote to navigate between fields.
PRO:CENTRIC MANUAL CONFIGURATION
Pro:Centric Mode
Media Type
Data Channel
Signal Strength
Signal Quality
PRO:CENTRIC MANUAL CONFIGURATION
Pro:Centric Mode
Media Type
IP Address
IP Port
2. In the Pro:Centric Mode field, use the Left/Right arrow keys to select the appropriate Pro:Centric
Application Mode—FLASH, GEM, HTML, or CONFIGURATION ONLY.
Note: For remote management only, select CONFIGURATION ONLY. The STB will search for
E-Z Installation data downloads; however, Pro:Centric application data will not be downloaded,
i.e., Installer Menu item 098 PRO:CENTRIC will be set to 0.
22
< >
CONFIGURATION ONLY
< >
RF
< >
1
0%
0%
No Signal
BACK EXIT SEARCH
< >
CONFIGURATION ONLY
< >
IP
255
255 255 255
0
IP server not found
BACK EXIT SEARCH
Pro:Centric Manual Configuration Screen
with RF Media Fields
02
Pro:Centric Manual Configuration Screen
with IP Media Fields
02
(Continued on next page)
206-4272