Chapter 23: Quick Call Ii; Initiating Quick Call Ii Transmission - Motorola APX NEXT User Manual

MN005642A01-AN
Chapter 23 : Quick Call II
Chapter 23
Quick Call II
This feature allows you to broadcast a series of distinct, recognizable tones before a voice
transmission from the dispatcher or a radio.
The broadcasting dispatcher or radio user can select this pre-programmed Quick Call II tone
transmission to be sent to an individual talkgroup or over the entire system. Each tone is distinctive to
indicate different situation or different broadcaster.
NOTE: The receiving radio must be configured with the matching Quick Call II tone from the
transmitting radio, in order for the receiving radio to sound the selected tone followed by the
pre-configured alert tone.
23.1

Initiating Quick Call II Transmission

Prerequisites: Tone must be preprogrammed into the Tone Signaling List on the broadcasting or
transmitting radio.
Procedure:
1 From the Home screen, tap
2
To broadcast, tap
NOTE: Aside from the list, tap
3 To broadcast the required tone, press the PTT button.
NOTE: The broadcasting and receiving radio sound the required tone.
You can begin your call after the tone ends.
4 To listen, release the PTT button.
88
More.
Quick Call II, then select the required tone from the list of tones.
Search to search the required tone.