Chapter 8 Startup Using nV-Tool
8.3 Master Station Startup Procedure
The following procedure is necessary on the FL622 side besides download to FL654A.
(1) Talker block is registered on "Scanning memory folder" of "FL-net LAN".
The talker block of the dummy station for the master station and the talker block of FL622 are
registered respectively.
Talker block of FL622 is set to the place of FL-net common memory area allocated
in FL654A subordinate's output module.
In this sample, it registers thoroughly to talker block of dummy station for remote I/O
station of "FL-net Control LAN".
Talker block of dummy station for master station is set to include talker area of
remote I/O station.
In this sample, the transmission block is done as well as "Transmission area of
FL654A".
8
70
6F8C1625
Talker block of FL622
Talker block of dummy station for master station