Siemens DMS8000 MP4 Series Installation, Configuration And Operations Manual page 12

10
Building Technologies
Fire Safety & Security Products
3. Select the NICE Decoder icon
Decoder.
Configuring the Decoder IP address
1. Select the new Decoder node and click the Node tab.
Note: By default, the node will be named 'Nice #nn' or 'River #nn'. In the Node
tab, you can customise the Description text.
2 In the Setting section, enter the IP address,
which should match the value locally set in the Decoder unit.
Linking the Decoder node
1. Expand the node structure including the NR Video Driver:
Supervisor System Settings  MM8000 System  Physical configuration
 <Station name>  Video Network Manager
2 Select the Decoder node.
3. Drag and drop the link to the Video Driver.
Connecting the monitors
1. Expand the Decoder node.
2. Select the Video Out Folder.
3. Add the required video outputs by clicking the Video Out icon
Press the SHIFT key when clicking the icon to add multiple nodes at once.
4. Expand the Video Monitors folder.
5. Select the video-out node of the Decoder.
6. Drag and drop the 'video signal' to the video-in node of the monitor.
7. Connect other outputs to the corresponding monitor inputs as necessary.
Fig. 6 Connecting Decoder outputs to Monitor inputs
or RIVER Decoder icon
048_DMS_MM8000_NICE_Add-On_MP4.30_A6V10097205_a_en.doc
Configuration
to add the
.
06.2010