Honeywell
4. Installation and wiring information
4.1 Identification of the unit
Before to install the CD3000M unit examine for damages or deficiencies. If any is
found, notify the carrier immediately. Check that the product features shown on
CD3000M cover and identification label corresponds to that ordered.
4.2 Installation
CD3000M unit should be always
mounted in vertical position to
improve air cooling on heatsink.
Maintain minimum distances in
vertical
and
in
represented. Don't install in proximity of hot
elements
and
near
electromagnetic interferences.
When more units are mounted inside a cubicle
provide air circulation as below represented.
Sometimes it is necessary to provide a fan to
have a better air circulation.
www.honeywell.com/imc
CD3000M-1PH up to 110A
horizontal
as
below
units
generating
An identification label provides all the
informations regarding the factory
settings of the unit. This label is on the
board inside the unit, as represented
AMPS
15
60
25
90
35
110
45
___
2 cm
AIR INPUT
8
User's Manual
AUX.
INPUT
FIRING OPT.
240V
ZC
S.S
0-10V
SC
DT
440V
4-20mA
____
____
SSR
POT
PA
AIR OUTPUT
15cm