Ipv6 Settings; Auto Detection - D-Link DVA-2800 User Manual

Section 4 - Configuration
Select Auto Detection to automatically detect the IPv6 connection method used by your
Internet Service Provider (ISP). If Auto Detection fails, you may manually select another IPv6
connection type.

IPv6 Settings:

IPv6PD: Enable or disable IPv6 prefix delegation.
My Internet Select Auto Detection.
Connection is:
DNS Type: Select either Obtain DNS server address automatically or Use
the following DNS address.
If you selected Use the following DNS address, the following options are available:
Primary DNS
Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
Click Save when you are done.
D-Link DVA-2800 User Manual
IPv6 Settings

Auto Detection

IPv6 SETTINGS
IPv6PD: Enabled
My Internet Connection is: Auto Detection
DNS Type: Obtain a DNS server address
IPv6 SETTINGS
IPv6PD: Enabled
My Internet Connection is: Auto Detection
DNS Type: Use the following DNS
Primary DNS Server:
Secondary DNS Server:
⌵
⌵
⌵
⌵
38