Creating A User Keyboard Percussion Kit - Yamaha Electone STAGEA ELC-02 Owner's Manual

Creating a User Keyboard
Percussion Kit
You can create your own original Keyboard Percussion
kit by assigning specific drum/percussion sounds to the
notes on the keyboard. To do this, assign your desired Kit
(pages 83 – 92) to a User Keyboard Percussion (any of
User 1 – 40), then assign each desired drum/percussion
sound to any key or pedal. The created User Keyboard
Percussion kit can be called up via the KEYBOARD
PERCUSSION [1] or [2] button. In the instructions
below, drum sounds are assigned to User 1 and called up
with the KEYBOARD PERCUSSION [1] button.
NOTE
By default, the same data as the Preset 1 – 2 of the EL Kit is
stored to User Keyboard Percussion 1 and 2.
1
Turn on the Keyboard Percussion
function by pressing the KEYBOARD
PERCUSSION [1] button.
The K.B.P. display appears.
2
Press [USER 1] on the display.
This procedure assigns User 1 to the KEYBOARD
PERCUSSION [1] button.
This lets you call up the User 1 settings the next time
you press the [1] button.
3
Press the [ASSIGN] button at the right
top on the display to call up the ASSIGN
page.
4
Press the [KIT CHANGE] button at the
center on the display to call up the Kit
list of the Keyboard Percussion, then
select the desired kit.
The message "Are you sure you want to reset the
setup data to the default values and clear the
assignments?" appears when you change the kit.
Select [OK] to clear all assignments and detailed
settings (made in the SETUP Page) and call up the
selected kit on the panel. Select [CANCEL] to call up
the selected kit without erasing the assignments and
detailed settings.
5
Select the desired drum instrument that
you wish to assign to a key.
Select the desired drum instrument category with
the category buttons in the display. The drum
instrument menu of the selected category appears.
Drum Instrument Menu
Reference page
• Kit Assign List (page 83)
ELC-02/ELCU-M02 Owner's Manual
Keyboard Percussion
Drum Instrument Category
5
79