Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha 2005 MT-01 Owner's Manual

Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24202
Replacing the license plate
light bulb
1. Remove the license plate light cov-
er by removing the screws.
1. Screw
2. License plate light cover
2. Remove the license plate light lens
by removing the screws.
ECA11190
EAU36810
1. Screw
2. License plate light lens
3. Remove the defective bulb by pull-
1. License plate light bulb
4. Insert a new bulb into the socket.
5. Install the license plate light lens
6-29
ing it out from the socket.
by installing the screws.
6