Initializing The Speaker - Sony SRS-ZR7 Help Manual

Help Guide
Personal Audio System
SRS-ZR7

Initializing the speaker

With the speaker turned on, press and hold the
more than four seconds.
The speaker is initialized, and it enters the standby mode. The settings of the speaker return to their factory defaults, and network
settings and all BLUETOOTH device registration (pairing) information are deleted.
Note
If you initialize the speaker, it may not be able to make a BLUETOOTH connection with your iPhone/iPod touch or PC. In this case, erase the
pairing information of the speaker on your iPhone/iPod touch or PC, and then perform the pairing procedure again.
4-592-259-11(1) Copyright 2016 Sony Corporation
(power)/ PAIRING button and the - (volume) button at the same time for
264