Table of Contents
Advertisement
Using the Mobile-High Definition Link (MHL)
NOTE: This monitor is MHL ready.
NOTE: To use the MHL function, use only MHL certified cable and source devices
that support MHL output.
NOTE: Some MHL source devices may take more than a few seconds or longer to
output an image, depending on MHL source devices.
NOTE: When the connected MHL source device enters standby mode, the monitor
displays a black screen or the message below, depending on MHL source device's
output.
To enable MHL connection, please perform the below steps:
1
Plug the power cable on your monitor into a AC outlet.
2
Connect the (micro) USB port on your MHL source device to HDMI/MHL port
on the monitor with a MHL certified cable (see
3 Turn on the monitor and the MHL source device.
4
Select input source on monitor to HDMI/MHL by using OSD menu (see
the On-Screen Display (OSD) Menu
5
If the monitor does not display an image, see
(MHL) Specific
Problems.
Bottom View
for details).
Mobile High-Definition Link
Setting Up the Monitor
for details).
Using
|
29
Hide quick links:
Advertisement
Table of Contents
