Sony VPL-VW600ES Quick Reference Manual page 13

Projecting
1
Turn on both the unit and the
equipment connected to the unit.
2
Press INPUT to display the input
palette on the screen.
3
Select the equipment from which you
want to display images.
Press INPUT repeatedly or press
t;.J.;
8
(enter) to select the equipment from
which to project.
Input
lii•J&ii-
HDMI2
~)lm)E!n$i¢6ll
Example: To view the picture from the
video equipment connected to the HOM I
1 connector of this unit.
1
Press the
1/C)
(ON/STANDBY)
button.
A message "POWER OFF?" appears on
the screen.
2
Press the
1/C)
(ON/STANDBY) button
again before the message disappears.
The ON/STANDBY indicator flashes in
green and the fan continues to run to
reduce the internal heat.
The fan stops and the ON/STANDBY
indicator changes from flashing green to
remaining red.
The power is turned off completely, and you
can disconnect the AC power cord.
•~mtJ
Never disconnect the AC power cord while the
indicator is flashing.
You can tum off the unit by holding the
1/~
(ON/STANDBY) button for about
1
second,
instead of performing the above steps.
For more information, refer to
"Projecting" in the Operating Instructions
contained in the supplied CD-ROM.
13