Rear Panel; Dgs-1210-52; Front Panel - D-Link DGS-1210-20 Reference Manual

1 Product Introduction

Rear Panel

Power: Connect the supplied AC power cable to this port

DGS-1210-52

48-Port 10/100/1000Mbps plus 4 SFP Slot Web Smart Switch.

Front Panel

Power LED : The Power LED lights up when the Switch is connected to a power source.
Port Link/Act/Speed LED (1-48): The Link/Act/Speed LED flashes, which indicates a network link through
the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the port.
When a port has an amber light, this indicates that the port is running on 10M or 100M. When it has a green
light it is running on 1000M.
Port Link/Act/Speed LED (49F, 50F, 51F, 52F): The Link/Act/Speed LED flashes, which indicates a
network link through the corresponding port. Blinking indicates that the Switch is either sending or receiving
data to the port. When a port has an green light, this indicates that the port is running on 1000M.
Reset: Press the Reset button for 5 seconds to reset the Switch back to the default settings. All previous
changes will be lost.
Rear Panel
Power: Connect the supplied AC power cable to this port.
Figure 1.4 – DGS-1210-28P Rear Panel
Figure 1.5 – DGS-1210-52 Front Panel
CAUTION: The MiniGBIC ports should use UL listed Optical
Transceiver product, Rated Laser Class I. 3.3Vdc.
Figure 1.6 – DGS-1210-52 Rear Panel
D-Link Web Smart Switch User Manual
5
5