Table of Contents
Advertisement
2
Put on the 3D glasses.
Precautions for use
Misoperation may occur if:
• The viewing position is too far from the projector
• There are other communication devices, such as a
wireless LAN (IEEE802.11 b/g/n) or a microwave with
a bandwidth of 2.4 GHz, near the unit
3D glasses communication range
The following figure indicates the communication range of
the 3D glasses. If you try to watch 3D video images from
a distance greater than the communication range or install
the unit outside the communication range, the 3D glasses
may not be able to display the images properly. Also, the
distance varies depending on the environment of the room
and installation environment of the unit.
Top or side view
10 m
10 m
10 m
Projector
10 m
13
Using the Picture
Position
You can store up to five combinations of lens settings
(focus, picture size, picture position), aspect ratio, and
blanking. These settings can be recalled.
1
Press POSITION.
The Picture Position selecting palette is displayed.
2
Press POSITION repeatedly, or press M/m/
select the position.
The settings of the position selected is recalled.
Store or delete lens settings, aspect ratio, and blanking
in the "Picture Position" of the Screen
(page 24).
The position where the lens settings, aspect ratio, and
blanking are not stored is displayed as "---."
Image of the lens moving
In the example below, the images with aspect ratio of
1.78:1 (16:9) and 2.35:1 are projected on a 2.35:1 screen.
When a 1.78:1 (16:9) image is input
When a 2.35:1 image is input
The 2.35:1 image expands to fill the screen.
to
menu
Press the POSITION button.
Advertisement
Table of Contents
