Replacement
4.15 Adhesive WP Cover Rear
Follow the 3.1 and 3.2 Disassembly instructions!
Carry out the Removal as described below!
Prepare a new Adhesive WP Cover Rear!
Carry out the Installation as described below!
Follow the 5.9 - 5.11 Reassembly instructions!
REMOVAL
Remove the Adhesive WP Cover Rear with fingers.
Scrap! Not to be reused!
INSTALLATION
Adhesive WP Cover Rear
Place a new
Rear Cover
Adhesive fixture (Bottom Part).
Then place the old Rear Cover Assy above
Cover Rear
Important to make sure that old adhesive is
removed before installation because of WRT requirement!
Place the Upper part of the fixture and press by hand for 10
sec
1277-9813 Rev 3
Sony Mobile Communications AB – Company Internal
with fingers in the
Adhesive WP
Working Instruction (mech)
26(82)