S/T Idler Assembly Replacement - Sony Betacam SX DNV-5 Maintenance Manual

3-3-2. S/T Idler Assembly Replacement

3-3-2. S/T Idler Assembly Replacement
Outline
Replacement
S or T idler assembly removal
Installation shaft cleaning
S or T idler assembly installation
Precaution
The S idler assembly and T idler assembly differ in parts, but replacement procedures are almost the same
for them.
The adjustment after replacement is not required. However, confirm the operation such as PLAY,
F.FWD, and REW.
Preparations
1. Turn off the power.
2. Remove the front lid and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
3. Remove the cassette compartment.
(Refer to section 3-3-24.)
n
Stop washers are used for installation of the S and T idler assemblies. Do not reuse them. Install the new
ones (3-559-408-11) when replacing the S and/or T idler assembly.
Tools
. Torque screwdriver bit (for M1.4)
. Torque screwdriver (for 3 kg)
. Stop washer fastening tool
. Cleaning cloth
. Cleaning fluid
. Oil
3-42
J-6325-110-A
J-6325-400-A
J-6323-530-A
3-184-527-01
9-919-573-01
7-661-018-18
DNV-5
DNW-7/90/90WS