Epson Stylus Pro 3880 User Manual page 67

Note: You may need to
change the Color Density
setting if your custom
color profile was created
to optimize D-max and
color gamut.
Printing with Epson Drivers for Macintosh
• Off (No Color Adjustment
printer driver. Choose this setting when you use a color-managed
workflow in Photoshop or other software applications.
3. If you are using non-Epson media and you need to fine-tune its
performance, select
see a window like this one:
4. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
• Color Density
when you turn off color management in your printer software).
• Drying Time per Print Head Pass
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Thickness
sharper image when printing on unusually thick or thin paper.
lets you fine-tune the setting for unusually thick or
• Platen Gap
thin paper.
3-67
) to disable color management in the
Paper Configuration
lets you control the ink saturation level (for example,
lets you print with non-Epson
helps reduce banding. Choose a lower
helps reduce vertical banding and creates a
from the pop-up menu. You
| 67